Above the LCD screen dirty, how to do? ?

I bought a Taiwanese BenQ's LCD monitor (FP91G +)

A few days ago I was not home

LCD Monitors
I put a little brother in the display next to the glass of Sprite, and then cup the bubbles burst out of the small droplets to splash display, and then I come back, to see how the display appeared in so many highlights and bad points, knew that such a thing, very simple, with a soft damp cloth over wet cleaning can be. and then in the ventilation to dry natural gas, Sheung Shui LCD screen.
Note: Do not use alcohol or acetone for cleaning fluid or detergent containing chemical components, can not spray liquid directly to the screen surface ...

1. How to clean LCD screen

LCD displays use a period of time, you will find on the screen often adsorbed layer of dust (turn off the LCD rear look more obvious), and sometimes accidentally glue a variety of stains, this certainly will greatly affect the visual effects, the How clean?

① to turn off the LCD power supply, ,Touch Screenand remove the power cord and plug cable cards.

② The LCD is better to move to a place of natural light in order to see where the dust, but also conducive to targeted, so as to achieve better cleaning effect.

③ LCD screen does not require any special cleaning solution or rags to the author's experience, water + soft, lint-free cloth or cotton flannel is not the best LCD screen cleaning tool (can not afford to scrap paper towels too). No time available in a clean cotton cloth moistened with waTouch Screen Panelter and then wring a little, and then slightly damp soft lint-free cloth on the screen to gently wipe the dust (do not force the extrusion screen), wipe from the display when the proposed rub one side to the other until all wipe clean up, do not casually waved.

Tip: not with a hard cloth, wipe the hard paper. At the same time do not use alcohol or acetone for cleaning fluid or detergent containing chemical components, can not spray liquid directly to the screen surface, so as to avoid liquid penetration into the protective film.

④ soft damp cloth with a relatively wet after cleaning End LCD screen, a screw can be relatively dry cloth to clean the first time. Finally, ventilation of natural gas to dry the Sheung Shui LCD screen can be.

2. Other service and maintenance points

(1) to avoid vibration. LCD's Touchscreen LCDLCD screen is very fragile, to avoid strong shock and vibration. Not to the LCD screen on the LCD or exert pressure on the back cover LCD display collision and compression.

(2) Avoid prolonged use of the screen. Long-term work for the LCD is not a good thing, if not, be sure to turn off the monitor power. Similarly, the LCD must be careful when using wallpaper and screen savers. Most of the wallpapers and screensavers pictures are colorful, light, contrasting light and dark changes, prolonged use will make LCD color distortion
Touchscreen Monitor

affecting the life of LCD screens. Therefore, when using the best use of monochrome LCD screen and cancel screen saver.

(3) anti-electromagnetic interference. CRT or LCD monitor, whether to be away from strong magnetic objects, strong magnetic field surrounding the internal display will generate additional voltages, thus affecting the stability of the voltage monitor. Strong magnetic field in a long time, but also makes the color distortion, thus affecting the effectiveness and life of LCD display.

(4) Note that wet. Do not let any moisture into the LCD, such as LCD indoor humidity is too high may cause condensation inside, so LCD leakage and short circuit occurs, severe burn will also display. ,Touch Screen LCDFor some in the south high humidity can be LCD warmer and dry place to place, but also do not regularly use the power lamp on the LCD display back to baking, so that one of the water evaporate.